Rockaway Township Board of Education

USB Flash drives are miniature hard drives that you connect to your computer using a USB port. Typically, the capacity for a Flash drive is between 128MB to 1GB and above. The larger drives should provide enough storage capacity for you to back up a great deal of data (even more than a CD if your Flash drive is 1GB).

However, if the data you want to back up exceeds the limit of the drive, you will need to use an alternate form of external media such as a CD.

The instructions outlined here are based on a Windows XP computer. If you have a different version of the Windows operating system, these instructions may not work exactly as they are outlined here. For example, the images of dialog boxes or windows may look slightly different.

How to Back Up Data to a USB Flash Drive

1. Insert the Flash drive into a USB port on your computer.

2. Click Start in the lower-left corner of the computer's desktop.

3. Click My Computer.

4. You should see an icon for the Flash drive in the My Computer

window.

5. Resize the My Computer window so that when you open the

location (window) where the files/folders you want to back up

are located, the windows do not overlap each other on the

desktop.

6. Open the location of the files/folders you want to back up.

(There are many ways to locate your files - use the procedure

normally use.)

7. Move the mouse cursor over the file/folder you want to copy

and hold down the left-side button on your mouse to select

the file or folder icon.

8. Drag the icon over to the Flash drive icon.

9. When a small plus sign (+) appears over the Flash drive icon,

release the mouse button. A copy of the file or folder will now

be located on the Flash drive.

10. To verify that the file or folder has been copied to the drive,

double-click the Flash drive icon to open it. The file or

folder that you copied should be listed.

11. Repeat steps 6-9 until you have copied all the files or

folders you want to back up.

12. You can remove the drive by pulling it from the USB port, but

it is better to "stop" the device before removing it. To do so,

double click on the flash drive icon on the bottom right of your

screen and follow the prompts.